;FLAVOR:Marlin
;TIME:1652
;Filament used: 2.49128m
;Layer height: 0.3
;MINX:176.987
;MINY:228.537
;MINZ:0.3
;MAXX:322.648
;MAXY:273.043
;MAXZ:1.8
;Generated with Cura_SteamEngine 5.3.0
M140 S100
M105
M190 S100
M104 S240
M105
M109 S240
M82 ;absolute extrusion mode
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G1 Z15.0 F9000 ;move the platform down 15mm
G92 E0 ;zero the extruded length
G1 F200 E3 ;extrude 3mm of feed stock
G92 E0 ;zero the extruded length again
G1 F9000
;Put printing message on LCD screen
M117 Printing...
以上是好的
以下是大不了的
;FLAVOR:Marlin
;TIME:1729
;Filament used: 2.76217m
;Layer height: 0.3
;MINX:188.217
;MINY:169.258
;MINZ:0.3
;MAXX:314.82
;MAXY:333.503
;MAXZ:1.8
;Generated with Cura_SteamEngine 4.13.0
M140 S80
M105
M190 S80
M104 S225
M105
M109 S225
M82 ;absolute extrusion mode
G28 ;Home
G1 Z15.0 F6000 ;Move the platform down 15mm
;Prime the extruder
G92 E0
G1 F200 E3
G92 E0
G92 E0
G92 E0
G1 F1500 E-6.5
;LAYER_COUNT:6
;LAYER:0
M107
————————————
G28 ;Home 今天切片，G28这里直接没有X0Y0