Menu + Tuning options
When in use, the W2 screen will show you the actual volume, the format, the sample rate/bit depth and the EQ setting.
The first setting in the menu is for the EQ. Here you have the following options: Normal, Game, Movie, Bass, Jazz, Classic, Pop and Rock. I do suggest to use the “Normal” setting for your normal music listening, but you may of course prefer one of the other settings.
The second setting is for the SDF. Depending on your firmware version (a pita to update btw) you here will have the following options: Xelento, SE846, IE800S or Normal. You can play with it depending on the IEM in use, especially if you’re using one of these inears (duh), but I just keep it in Normal as well.
The third setting is the one for the gain. You can just choose between Low and High, but I only few occasions needed to use it. More on that later. I do tend to prefer the Low gain setting, as it sounds more natural and less “forced”.
Setting number four is for the FLT. Here you have the following choices: NOS (minimizes the internal digital processing), LL SLOW, LL FAST, SLOW and FAST. I in most cases prefer the NOS setting but you might like a different one. It also depends on the ear/headphone in use, though the differences aren’t day and night.
Option 5 lets you set the SPDIF on or off. It’s the 3.5mm connector you need to use for that. It works as promised but I have to say I never really used it as I have no need for it.If you do require your dongle to convert your signal to SPDIF for one of you other decoding units, then it is a really nice feature.
Option six is for the display: manual or AutoOff are the only options here. The seventh(!)setting lets you set the HID key to on or off. In very short: in the “On” mode, the W2 uses the volume of the connected source. In the “OFF” mode, you use the W2’s volume control. For me it’s always “Off”
The last setting is for the “Tune” as L&P call it. You have the choice between 01 Gentle, and 02 Refined. I prefer the refined setting but the differences are minimal, yet audible.Tune 01 has a more softer signature where the Refined setting, sound more digital.
菜单+调音选项
在使用W2时,它的屏幕会显示实时音量、文件格式、采样率/比特深度和EQ设置。
菜单中的第一个设置是EQ的设置。这里你能看到以下选项:常规、游戏、电影、低音、爵士、古典、流行和摇滚。我建议使用 "常规"设置来聆听一般的音乐,当然你也可以选择其他EQ设置。
第二个设置是针对特调固件的。根据你的固件版本(更新起来很麻烦),你在这里将有以下选项:榭兰图、SE846、IE800S或常规。你可以根据所使用的入耳耳机型号来调整它,尤其是如果你用的是固件里的这些入款款式(这是理所应当的),但我依然只是把它保持在“常规”选项。
第三个是关于增益的设置。你可以在低和高之间选择,但我只有在少数情况下需要使用它。稍后会有更多关于这个设置的介绍。我更倾向于低增益设置,因为它听起来更自然, "侵略性"更小。
第四项设置是用于数字滤波器。这里你有以下选项:NOS(最小化内部数字处理)、低延迟慢速衰减、低延迟快速衰减、带相位补偿的慢速衰减和快速衰减。在大多数情况下,我更喜欢NOS设置,但你可能喜欢不同的设置。这也取决于所使用的耳机和你的耳朵,虽然差别没那么大。
选项5是让你设置S/PDIF输出的开/关。你需要用3.5mm接口标准的插头来进行设置。如果你确实需要你的小尾巴将模拟信号转换为S/PDIF数字信号,用于连你的其他外置解码,那么这是一个非常好的功能。
第六个选项是显示设置:手动或自动关闭是这里唯一的选择。第七个(!)设置让你把HID KEY设置为开或关。简而言之:在 "打开"模式下,W2使用的是所连接音源的实时音量。在 "关闭"模式下,你使用W2机身的音量控制。对我来说,它总是 "关闭"的。
最后一个设置是乐彼官方所说的 "乐调音"模式。你可以在01温柔模式和02精致模式之间选择。我更喜欢02精致的设置,两者差别很小,但可以听出来。01模式有一个更柔和的调音特征,而02精致模式,听起来更有数字播放器的素质感。
