daphile吧 关注:2,222贴子:5,047

daphile几个关键设置

只看楼主收藏回复

daphile几个关键设置
第一:settings >power>clock source>ACPI-PM
这个时钟设置让声音立刻提升几个档次!
项目下把CPU设置频率最高!
第二:高级设置> player>audio> LAME Quality Level>0
第三:高级设置>Advanced>performance>Database Memory Config>Maximum


IP属地:湖北1楼2019-12-24 20:12回复
    官方不是说要用老电脑吗?我还特意买了一个最省电的单核心的赛扬CPU来用,为什么要设置CPU频率最高?对比有什么提升吗?实际能听出来吗?


    IP属地:北京2楼2019-12-26 22:03
    收起回复
      应该选 TSC吧,这个最准


      IP属地:北京3楼2020-01-02 11:20
      收起回复
        跟着楼主的教程设置了一下,还有什么提升音质的好招数?教我们一下


        IP属地:北京4楼2020-01-03 15:05
        回复
          楼主加微信聊了


          5楼2020-04-03 15:39
          收起回复
            TSC是Processer中的Timestamp Counter Register
            HPET是高精度事件计时器.
            ACPI-PM 是ACPI电源管理定时器
            内核在启动的时候,会从众多时钟源里面选择一个,首选Time Stamp Counter (TSC),其次是High Precision Event Timer (HPET),当前面都不可用的才会去用另外的 ACPI Power Management Timer (ACPI_PM) , TSC的性能大概比HPET好20倍,TSC性能比ACPI_PM要好40倍。
            以上是纯LINUX运行的基本原理,但HIFI界普遍都说TSC不好,我也不得而知,现在一直使用HPET感觉还不错,ACPI-PM对于播放器来说性能最差,而且还取决于你的电源档次


            IP属地:浙江8楼2020-05-02 15:45
            收起回复
              @超级黑色月光 第3项。保存并重启。过一会儿显示。无法连接服务器,请稍后重试。是什么原因谢谢。


              来自Android客户端9楼2020-05-13 22:03
              收起回复
                关于时钟设置的最终解释。
                TSC低音速度最快,适合15寸及更大的或者小尺寸长冲程的低音喇叭,可以加强低频控制力。
                HPET低频速度稍微慢点,适合低频稍微差点的音箱。
                ACPI-PM适合低频少而急促的书架音箱,可以增加低频延时效果。


                IP属地:湖北10楼2020-06-11 16:12
                收起回复
                  你好,请教一下daphile哪个选项是设置升频呀


                  IP属地:海南来自Android客户端11楼2020-08-07 12:01
                  回复
                    树莓派和电脑哪个音质好


                    IP属地:美国来自Android客户端12楼2020-08-27 20:14
                    收起回复
                      第二:高级设置> player>audio> LAME Quality Level>0
                      第三:高级设置>Advanced>performance>Database Memory Config>Maximum
                      请教楼主,这两个设置是在哪里找到的?我怎么找不到?


                      IP属地:山东13楼2021-03-15 10:09
                      收起回复
                        刚才去国外查了一下,感觉还是ACPI最好,频率固定:
                        Time Stamp Counter (TSC)
                        All 80x86 microprocessors include a CLK input pin, which receives the clock signal of an external oscillator. Starting with the Pentium, 80x86 microprocessors sport a counter that is increased at each clock signal, and is accessible through the TSC register which can be read by means of the rdtsc assembly instruction. When using this register the kernel has to take into consideration the frequency of the clock signal: if, for instance, the clock ticks at 1 GHz, the TSC is increased once every nanosecond. Linux may take advantage of this register to get much more accurate time measurements.
                        ACPI Power Management Timer (ACPI PMT)
                        The ACPI PMT is another clock device included in almost all ACPI-based motherboards. Its clock signal has a fixed frequency of roughly 3.58 MHz. The device is a simple counter increased at each clock tick. However the ACPI PMT is preferable to the TSC if the operating system or the BIOS may dynamically lower the CPU's frequency or voltage. When this happens, TSC's frequency changes causing time warps and others side-effects, while the frequency of ACPI PMT does not.


                        IP属地:上海14楼2021-04-20 21:16
                        收起回复
                          你好,我是u盘启动器,电脑显示屏是关闭的,怎么进win系统浏览器,求教


                          IP属地:湖南来自Android客户端16楼2021-05-11 13:59
                          收起回复
                            daphile不支持dcs维瓦尔弟解码吗?试了不认解码器


                            IP属地:湖南来自手机贴吧17楼2021-11-16 21:32
                            回复
                              耳朵对比,ACPI声音很虚,结像非常不清晰。TSC音质最好


                              IP属地:中国香港来自iPhone客户端18楼2021-12-02 01:13
                              收起回复